Loading ...
Loading ...
Loading ...
100868 - LOAD MANAGEMENT MODULE- ALL aXis CONTROLLER MODELS
®
9
INSTALLATION
Unpacking
Carefully unpack the LMM. Inspect closely for any damage that might have occurred during shipment. Check
that all packing material is completely removed from the LMM prior to installation. Handle LMM carefully
when installing. Do not drop. Always protect the LMM against impacts and against construction grit and
metal chips. Never install an LMM that is damaged.
Tools Required Not Included
3/16 in. Flat Screwdriver Mounting Hardware
P2 Phillips Screwdriver Line Voltage Wire
1/4" Blade Screwdriver Conduit
Pliers Fittings
Wire stripper Twist on wire connectors – as needed
Installing the Load Management
Module (LMM)
The enclosure is NEMA type 3R rated and is suitable
for indoor/outdoor installations.
General guidelines:
– Mount to a surface that can support the 2.3 lb.
(1050 g) weight of the module that adheres to
all local codes
– The enclosure must be installed with NEMA type
3R hardware and connections when mounted
outdoors
– Level and plumb the module enclosure to
prevent deformation.
– Never install the module where any corrosive
substance may come in contact with the
enclosure.
– Protect the module at all times against
excessive moisture, dust, dirt, lint, construction
grit and corrosive vapors.
1. Remove the cover.
2. Break the lead to the load using code
compliant wire.
Loading ...
Loading ...
Loading ...