Loading ...
Loading ...
Loading ...
Important Safety Instructions
Do not use decorative surface burner covers, ifa
burner is accidentally turned on, the decorative cover will
become hot and possibly melt. Burns will occur if the hot
covers are touched. Damage may also be done to the
cooktop or burners because the covers may cause
overheating. Air will be blocked from the burner and cause
combustion problems.
FOR GLASS COOKTOPS ONLY
• Do not clean or operate a broken cooktop---If cooktop
should break, cleaning solutions and spillovers may
penetrate the broken cooktop and create a risk of electric
shock. Contact a qualified technician immediately.
• Clean cooktop glass with caution--if awet sponge or
cloth isused to wipe spills on a hot cooking area, be
careful to avoid a steam burn. Some cleaners can produce
harmful fumes ifapplied to a hot surface.
= Avoid scratching the cooktop glass with sharp objects.
IMPORTANT INSTRUCTIONS FOR USINGYOUR
OVEN
• Use care when opening oven door or warmer drawer (if
equipped)--Stand to the side of the range when opening
the door of a hot oven. Let hot air or steam escape before
you remove or replace food inthe oven/warmer drawer.
• Keep oven vent ducts unobstructed. The oven vent is
located at the center rear of the cooktop. Touching the
surfaces inthis area when the oven isoperating may
cause severe burns. Also, do not place plastic or heat-
sensitive itemson or near the oven vent. These items
could melt or ignite.
= Placement of oven/warmer drawer (if equipped) racks.
Always place oven racks indesired location while oven/
warmer drawer (if equipped) iscool. if rack must be moved
while oven ishot use extreme caution. Use potholders and
grasp the rack with both hands to reposition. Do not let
potholders contact the hot heating elements in the oven/
warmer drawer (if equipped). Remove all utensils from the
rack before moving.
= Do not use the broiler pan without its insert. The broiler
pan and its insert allow dripping fat to drain and be kept
away from the high heat of the broiler.
• Do not cover the broiler insert with aluminum foil.
Exposed fat and grease could ignite.
• Do not touch a hot light bulb with a damp cloth. Doing
so could cause the bulb to break. Disconnect the appliance
or turn off the power to the appliance before removing and
replacing light bulb.
IMPORTANT INSTRUCTIONS FOR CLEANING
YOUR RANGE
= Clean the range regularly to keep all parts free of grease
that could catch fire. Exhaust fan ventilation hoods and
grease filters should be kept clean. Do not allow grease to
accumulate on hood or filter. Greasy deposits in the fan
could catch fire. When you are flaming food under the hood,
turn the fan on. Refer to the hood manufacturer's
instructions for cleaning.
SELF=CLEANING OVENS
• In the self-Cleaning cycle only clean the parts listed in
this Use and Care Guide. Before self-cleaning the oven,
remove the broiler pan and any utensils or foods from the
oven.
• Do not use oven cleaners--No commercial oven cleaner or
oven liner protective coating of any kind should be used in or
around any part of the oven.
• Do not clean door gasket--The door gasket isessential for
a good seal. Care should be taken not to rub, damage or
move the gasket.
• Remove oven racks. Oven racks color will change ifleft in
the oven during a self-cleaning cycle.
The health of some birds is extremely
sensitive to the fumes given off during the self-cleaning
cycle of the range. Move the birds to another well
ventilated room.
SAVE THESE INSTRUCTIONS
Conversion to Liquefied Petroleum Gas (or L.P. Gas)
This natural gas range is designed to allow for conversion to
Liquefied Petroleum (L.P.) Gas.
if L.P. conversion is needed, contact the service center for
assistance. The L.P. Conversion Kit isprovided with this range
and is located on the right panel (right side) ofthe range. Before
installing the kit be sure tofollowthe L.P.installation instructions
carefully.
Personal injury or death from electrical shock
may occur if the range is not installed by a qualified installer
or electrician.
_Any additions, changes orconversions required
in order for this appliance to satisfactorily meet the application
needs must be made by an authorized Service Center.
Loading ...
Loading ...
Loading ...