Loading ...
Loading ...
Loading ...
Care & Cleaning
Removing and Replacing Warm & Serve Drawer
To Remove Warm & Serve Drawer:
1. _ Turn power off before removing the warm & Serve drawer.
2. Open the drawer to the fully opened position.
3. Locate glide lever on each side of drawer, pull up on the left glide lever and
push down on the right glide lever (See Figure 1).
4. Pull the drawer away from the range.
To Replace Warm & Serve Drawer:
1. Pull the bearing glides to the front of the chassis glide (See Figure 2).
2. Align the glide on each side of the drawer with the glide slots on the range.
3. Pushthedrawerintotherangeuntillevers"click"(approximately2").Pullthe
drawer open again to seat bearing glides intoposition. Ifyou do not hear the
levers "click" or the bearing glides do not feel seated remove the drawer
and repeat steps 1 thru 3.This will minimize possible damage to the bearing
glides.
NOTE: The Warm & Serve Drawer will NOT operate while in the"Self-Clean" and
"Oven Lockout" modes
Electrical Shock Hazard can occur and result in
serious injuryordeath. Disconnect appliance from electric power
before cleaning and servicing the warm & Serve drawer.
LefiGiide _ .........................Pull up latch
with finger
Pull down latch
with finger Right Glide
Figure 1
_ng Glide
Figure 2
18
Loading ...
Loading ...
Loading ...