Loading ...
Loading ...
Loading ...
WARNING: Make certain that unit is disconnected
from power source before attempting to service or
remove any component.
CLEANING
• Keep machine and workshop clean Do not allow
sawdust to accumulate on band saw
• Keep wheels clean Debris on wheels will cause
poor tracking and blade slippage
• Keep mechanisms and threaded or sliding surfaces
clean and free of foreign particles
• Operate band saw with a dust collector to minimize
clean up
LUBRICATION
• The shielded ball bearings are permanently lubricat-
ed and require no further lubrication
• Small amounts of machine oil can be applied to belt
tension mechanisms and threaded or sliding sur-
faces
• Occasionally apply a coat of automobile type wax to
table top to keep it slick and corrosion free
KEEP BAND SAW IN REPAIR
• If power cord is worn or cut in any way, have it
replaced
• Replace V-belt and blade when they are worn
Replace any damaged or missing part
• Use parts list to order parts
10
Loading ...
Loading ...
Loading ...