Loading ...
Loading ...
Loading ...
OPERATION
The operation of any tiller can resu|t in foreign objects thrown into the eyes, which can
resuJt in severe eye damage. Always wear safety gmasses or eye shields before starting
your tiller and while tilling. We recommend a wide vision safety mask over the spectacles
or standard safety glasses,
HOW TO USE YOUR TILLER
STOPPING (See Fig. 5)
TINES
= Retease forward tine control to stop forward move-
ment.
• Release reverse tine control to stop reverse move-
ment.
ENGINE
° Move throttle control to "STOP" position.
• Never use choke to stop engine.
REVERSE TINE CONTROL FORWARD TINE CONTROL
"OFF" (UP) POSITION
FORWARD TINE CONTROL
"ON" (DOWN) POSITION
CHOKE
CONTROL_ CONTROL
FIG. 5
TINE OPERATION (See Fig. 5)
FORWARD
, Squeeze forward tine contro_ to handle.
REVERSE
- With forward fine control in "OFF" (up) position, pult
back and hold reverse fine control
TILLING
The speed and depth of tilling is regulated by the position
of the depth stake and wheet height.
The depth stake should always be below the wheels for
digging. It serves as a brake to slow the tiller's forward
motion to enable the tines to penetrate the ground. Also,
the more the depth stake is lowered into the ground the
deeper the tines will dig.
DEPTH STAKE (See Fig. 6)
Adjust depth stake by removing the hairpin clip and clevis
pin. Change depth stake to desired position. Replace the
clevis pin and hairpin clip.
• For normal tilling, set depth stake at the second or third
hole from the top.
WHEELS (See Fig. 6)
Adjust wheels by"removing the hairpin clip and ctevis pin.
Change wheel position. Replace the hairpin clip and clevis
pin.
For normal tilling, set wheels at the second or third hole
from the top.
HAIRPIN CLIP
AND CLEVIS PIN
DEPTH
STAKE
"WHEEL
HAIRPIN CLIP
AND CLEVIS PIN
FIG. 6
9
Loading ...
Loading ...
Loading ...