Panasonic ER-GB96-K Beard Trimmer

User Manual - Page 7

For ER-GB96-K.

PDF File Manual, 56 pages, Read Online | Download pdf file

ER-GB96-K photo
Loading ...
Loading ...
Loading ...
7
English
Disconnect the adaptor from the household outlet
when not using.
- Failure to do so may cause electric shock or re
due to electrical leakage resulting from insulation
deterioration.
Disconnect the adaptor or the appliance plug by
holding onto the adaptor or the appliance plug
instead of the cord.
- Failure to do so may cause electric shock or injury.
► Handling of the removed battery when disposing
DANGER
The rechargeable battery is exclusively for use
with this appliance. Do not use the battery with
other products.
Do not charge the battery after it has been
removed from the product.
Do not throw into re or apply heat.
Do not solder, disassemble, or modify the battery.
Do not let the positive and negative terminals of
the battery get in contact with each other through
metallic objects.
Do not carry or store the battery together
with metallic jewellery such as necklaces and
hairpins.
Never peel off the tube.
- Doing so may cause uid leak, overheating, or
explosion.
WARNING
The supply cord cannot be replaced. If the cord is
damaged, the AC adaptor should be scrapped.
- Failure to do so may cause an accident or injury.
CAUTION
Protecting the skin
Do not press the blade strongly against your skin
or lips.
Do not use this product for any purpose other than
trimming beard.
Do not directly apply the blades on ears or rough
skin (such as swellings, injuries and blemishes).
- Doing so may cause injury to ears or uneven skin.
Check that the blades are not damaged or
deformed before use.
- Failure to do so may cause skin injury.
Note the following precautions
Do not allow metal objects or trash to adhere to the
power plug or the appliance plug.
- Doing so may cause electric shock or re due to a
short circuit.
Do not drop it or expose it to shock.
- Doing so may cause injury.
Do not wrap the cord around the adaptor when
storing.
- Doing so may cause the wire in the cord to break
with the load, and may cause re due to short circuit.
ER-GB96中南美 v10.indb 718/5/9 上午8:56
Loading ...
Loading ...
Loading ...