Loading ...
Loading ...
Loading ...
14
English
3. Wipe off the water with a towel
and let it dry naturally.
It will dry faster with the blade
removed.
4. Apply the oil to the blade after
drying. (See this page.)
5. Attach the attachment and blade
to the appliance.
The mark on the left means suitable for cleaning
under an open water tap.
With the brush
1. Remove the attachment and blade.
2. Brush off any hair trimmings from
the main body and from around the
blade.
3. Brush any hair trimmings out from
between the stationary blade and
the moving blade while pressing
down the cleaning lever to raise the
moving blade.
4. Apply the oil to the blade. (See this page.)
5. Attach the attachment and blade to the appliance.
Lubrication
• Apply the oil to the blade before and after each use.
1
2
3
Remove the blade.
(See this page.)
Apply a drop of the oil to
each indicated point.
Attach the blade to the main
body, turn on the power and
allow to run for approximately
5 seconds.
Removing the blade
Hold the main body with the switch
facing upward and push the blade with
your thumb while catching the blade in
your other hand.
Remounting the blade
Fit the mounting hook (
B
) into the blade mounting (
A
) on the
appliance and then push in until you hear a click.
ER-GB96中南美 v10.indb 1418/5/9 上午8:56
Loading ...
Loading ...
Loading ...