Loading ...
Loading ...
Loading ...
16
INSTALLATION
2
The fitting of the installation bracket depends
on each of the following cases.
Case 1
The custom Kick Plate is seperated.
Case 2
The custom Kick Plate is connected and the
dishwasher is at the end of the kitchen cabinet.
Case 3
The custom Kick Plate is connected, and the
dishwasher is in the middle of the kitchen
cabinet. (Using the brackets is not required.)
NOTE
• If necessary, trim the custom Kick Plate to avoid
interfering with the door opening action.
Installing the Drain Hose
If the end of the drain hose does not fit to the drain
line, use a drain extension kit (optional) that is
resistant to heat and detergent.
• This should be available from a plumbing shop
or a hardware store.
Connection to the Waste Spigot
Check the waste spigot when initially installing. An
OE
error can occur when the waste spigot below
the sink is not drilled out properly. To connect the
drain hose, drill out at least a 15 mm diameter hole
in the waste spigot before connecting and
securing.
487.5 mm
= d(= d(≥≥20) 20)
Max 60 mm
Loading ...
Loading ...
Loading ...