Loading ...
Loading ...
Loading ...
Connect the water line to the refrigerator.
1) Slip the compression nut through the provided
plastic tubing.
2) Tighten the compression nut onto 1/4"
comprression fitting.
@ Do not overtightenthe compressionnut.
NOTE
• Using Copper Tubing
- Slip the compression nut and ferrule on cop-
per tubing as shown.
• Using Plastic Tubing
- Insert the molded end of the plastic tubing
into the compression fitting.
3) Tighten the compression nut onto the com-
pression fitting.
4) Turn water on and check for any leakage.
@
NOTE
Ferrule ,,
(Purchased),,*
I Refrigerat°r I
_',, CompressionNut(1/4")
*, (Provided)
i
4_ , CompressionFitting
_S , (Provided)
11-
; CompressionNut(I/4")
(Purchased)
PlasticTubing
(Purchased) (Purchased)
I Household Water Line I
Waterline must be connected to drinkable water on yl
Cut off 1/4 inch of the provided plastic tubing squarely to prevent leaks when reconnect.
Install the water filter.
1) As shown, the fixed cap separates from the refrigerator by rotat-
ing it counterclockwise.
Remove the water filter from the box and put a month indicator
sticker on the filter as shown.
(_ Keep the cap(A)in a safe place for recapping' when you will
NOTE notuse the f!lter.
2) If the water filter was installed in March, put on the "SEP" sticker.
3) Remove the protective cap then position and insert the
filter as shown.
4) Slowly turn the water filter clockwise 90° to align
the indication mark on the cover, locking the filter in posi
tion. Do not overtighten.
SEPARATION
OF RED
@
NOTE
STICKER
(MONTH INDICATION)
____ ALIGN THE INDICATION MARK
TH LOCKPOSITION.
please check that the indication line aligns with the lock position.
27
Loading ...
Loading ...
Loading ...