Loading ...
Loading ...
Loading ...
Installation
49
EN
Fixing to the flush built-in model support
structure
Create an opening with the dimensions
shown in the figure in the countertop of the
piece of furniture.
*If there is a piece of furniture above the hob. In case of
hood, refer to the values on the dedicated manual.
This kind of built-in application needs a
milling on the hob top of 3 mm in depth
(detail "B" in the picture above).
Before positioning the appliance, place the
supplied seal (C) on the milling.
L (mm) X (mm) Y (mm)
620 592 488
L (mm) X (mm) Y (mm) G (mm) H (mm)
620 592 488 621 513
A (mm) B (mm) C (mm)* D (mm) E (mm)
min 150 min 460 min 750 20 - 40 min 50
Loading ...
Loading ...
Loading ...