Loading ...
Loading ...
6
OPERATION AND USE
- Connect the appliance to the power outlet.
- The appliance emits a beep and the power indicator
light (H) comes on and remains on as long as the ap-
pliance is powered.
- The appliance goes into OFF. If the display show a
blinking dot, it means that the tip over switch has been
activated. See paragraph: “Additional safety features” .
- Press the ON/OFF button (A) to turn on the appliance. It
will begin to heat with the predened settings.
- Press the MODE button (F) to select one of the follow-
ing functions available:
Ventilation
Anti-freeze
Heating at minimum power (1)
Heating at maximum power/BOOST function (2)
Ventilation
In this operating mode only the fan operates, so the appli-
ance does not heat the room.
Anti-freeze
In this operating mode the appliance keeps the room at a
temperature of 45°F (7°C) to prevent freezing temperatures.
Heating 1 and Heating 2
In this operating mode you can set the desired temperature
by pressing the + and - adjustment buttons (B).
Heating 1 (minimum power level):
The appliance operates at the minimum power reducing
energy consumption to the minimum.
Heating 2/BOOST function (maximum power level):
The appliance operates at the maximum power for rapid
heating of the room.
Eco function
- In this operating mode the appliance will automati-
cally set the power level to guarantee the best comfort
reducing the energy consumption. In this operating
mode the unit may switch the heating power level
from maximum to minimum and viceversa, several
times in an hour. When using the ECO function, the
maximum temperature setting is 79°F (26°C). To acti-
vate this function, press the ECO button (D).
- If you want the appliance to distribute the airow over
a larger area, press the oscillation button (C) . The
appliance will then oscillate right and left. To stop the
oscillation in the desired position, just press oscillation
button (C) again.
- To turn o the appliance press button ON/OFF (A). The
display will show a count down for about 6 seconds.
Please note: The display can show the temperature
in both °F and °C. To change the temperature scale, press
and hold the + key for few seconds, then release. Please be
informed that as this is not a precision device, the showed
temperature not necessary corresponds to the real one.
24HOUR DIGITAL TIMER
This function can be activated from any operating mode.
Delayed switch-on: with the appliance in the OFF posi-
tion, press the timer button (E) . The display shows
the symbol and the time remaining before switch-on.
To set the timer, use the + and - adjustment buttons (B),
then wait a few seconds for the programming to be set. The
display shows the symbol to indicate you have set the
timer. When the programmed time has been reached, the
appliance turns on with the same settings it had during the
previous operation.
Delayed shut-o: With the appliance on, press the timer
button (E) . The display shows the symbol and the
time remaining before shut-o. To set the timer, use the +
and - adjustment buttons (B), then wait a few seconds for
the programming to be set.
The display returns to show the current settings and the
symbol to indicate you have set the timer. When the
programmed time as been reached the appliance shuts o
automatically. If you want to go back to operation without
the timer, press the timer button (F) twice. The timer symbol
disappears from the display.
USING THE REMOTE CONTROL
The remote control functions correspond to those on the
control panel. See the section “Operation and Use" on the
previous page for a description of the functions.
Inserting or replacing the batteries
- Remove the cover on the rear of the remote control;
- Insert two AAA (R03/1.5V) batteries (included but
packaged separately) making sure they are in the cor-
rect position (see the instructions inside the battery
compartment);
- Do not mix old and new batteries;
- Do not mix alkaline, standard (carbon-zinc), or re-
chargeable (ni-cad, ni-mh, etc) batteries;
Loading ...
Loading ...