Loading ...
Loading ...
Loading ...
8°iftapeholdsbottomdrawercovertodrawersupports,
removethetapePulldrawerpartwayoutReachin,push
therearoftheglassupand,atthesametime,back,until
itclearsfront-cornerretainers
9.Tiltandremovethecover
1OrTiltandremovethedrawer
Aftercleaning,replace
drawersandcoversin
reverseorderReinstallthe
gasketattherearofthetop
drawerFittheendofthe
plaslicdrawersupportinto
theslotonthegasket,with
therubbergasketflapfacing
you Makesurethegasket
snapsintoplace.
Thenreplacethelightpanelbyhangingtopofpanelon
upperpinsandpushinginatbottom
Drain Opening in Freezer Compartment
When cleaning, remove the
freezer bin and flush a
solution of baking soda (one
teaspoon) and two cups of
hot (not boiling) water
through the drain line with
the help of a meat baster
This will help eliminate odor and reduce the likelihood of
a clogged drain line.
If drain becomes clogged, use a meat baster and baking-
soda-and-water solution to force the clog
through the drain line.
Condenser
The condenser is located
behind the base grille. For
most efficient operation,
remove the base grille (see
page 3) and sweep away or
vacuum up dust that is readily
accessible. For best results, use a brush specially
designed for this purpose ft is available at your Sears
store or service center This easy cleaning operation
should be done at least once a year
Behind Refrigerator
Take care moving your refrigerator away from thewalt All
types of floor coverings can be damaged, particularly
cushioned coverings and those with embossed surfaces. Purl
the refrigerator straight out and return it to position by
pushing it straight in Moving refrigerator in a side direction
may damage floor covering or refrigerator
When pushing the refrigerator back, make sureyou don't
roll over the power cord or icemaker supply line..
Light Bulb Replacement
Unplug refrigerator before changing a light bulb.
Fresh Food Compartment-Upper Light
1_Pull off temperature control knobs
Pin
2. Pull the bottom of the light shield down and forward,
then rotate the top up and off.
After replacing with same size bulb, reinstall light shield
Fresh Food Compartment--Lower Light
(on some models)
This light islocated behind a shield at the rear of
the fresh Food compartment
1. Grasp the top edge of the shield and lift it up
and forward to free its top edge.
2o After replacing with same size bulb, hook the top
of the shield back in place.
Freezer Compartment
1. Remove shelf just below
light panel (Shelf will be
easier to remove if it is
emptied first,)
2. Pull plastic light panel toward you, (It will bend to free
tabs From grooves )
3. AFter replacing with same size bulb, reinstall panel
and shelf
13
Loading ...
Loading ...
Loading ...