Loading ...
Loading ...
Loading ...
Door Removal and Reversal Instructions (continued]
TRIM REMOVAL (FULL-LENGTH TRIM MODELS ONLY)
In some moae_s. _ne refrigerator door nas a ful eng_r _nrn piece wnlcn
continues from the bottom of the handle to the bottom of the door. The toD
of the trim attaches to _nenandle uracKe_ Figure - or fits around the base
of the handle (Figure2). An adhesive "tnrn ock" is dosmoned about halfway
down. The bottom of the trim is held'- place Dy either an adhesive trim tOOK.
or a trim OCKw_n _wo prongs inserted into a nole on _neface of the door.
TO REMOVE TRIM:
1. Remove trim Ey genw pumng_nrn lOCKareas ou_and away from aoor.
2. When _nm s free from door. shoe _ne_nm s_ra_gn_down and away
from base of nanaJe.
NOTE: For models with short handle _nm. remove by slidln? trim
straign_ Down and off of handle oracKet.
TO REMOVE REFRIGERATOR HANDLE:
(Handles "nayDe eas_er_o reverse wnHe doors are off.
Figure i Style Handles
1. Remove two screws attaching nandle _o_ODof refrigerator door.
2. Remove screw a_acnlng oottom of handle to door,
3. Remove two hole p_ugs and hinge p_np_ugon _ODof door and insta
on opposite side. Use Phillips head screwdriver to remove plastic
screw plug from front of door and install on opposite side
Figure 2 Style Handles
1. Remove two screws attaching handle to top of refrigerator door.
2. Swing top of handle away from door and slide handle down and off of
dovetail button.
3. Remove screw and dovetail button and install on other side, moving
hole plugs from corresponding holes to opposite side.
TO ATTACH REFRmGERATOR HANDLE:
Figure 1Style Handles
1. Secure bottom of handle with screws.
2. Secure top of handle with screws.
Figure 2 Style Handles
1. Start with handle offset away from door. Place bottom of handle over
dovetail button, swing handle into an upright position and pull upward,
locking it into place.
2. Secure top of handlewith screws.
TO ATTACH TRmM:
1. Slide both trim locke out of trim,
2. Insert new adhesive trim locks contained in your literature pack.
3. Install trim to handle by sliding under base of handle. Carefully align
trim and press down at trim lock locations.
4. Use rubbing alcohol to remove any adhesive residue from old trim
lock locations.
Handme
Adhesive
Fume
Length
Trin
--,\
/'
Figure 1
DovetaiB
Lock Handle
over
Dovetail
Adhesive
Lock
Trim
Lock
Figure 2
Loading ...
Loading ...
Loading ...