Loading ...
Loading ...
Loading ...
INSTALLATION AND OPERATING INSTRUCTIONS 7
1. Plug in the BlendPro and turn on at wall socket.
2. The BlendPro has touch panel with several different function
keys (Fig 3)
a. On/Off
Press the on/off button located on the top of the motor unit
to switch your BlendPro from energy saving mode to standby
mode. If the unit is in energy saving mode it will flash red, the
button will light up white if the unit is in standby mode. When
your BlendPro is in standby mode, you can switch the BlendPro
into energy saving mode by pressing this button again (fig 4)
b. Start/Stop Button
The start/stop button will star t any pre-set that you have
selected by pressing the designated pre-set button. If you
have set a speed in manual mode, it will start this speed. To
terminate the process press the button again and it will come
to a stop. To completely terminate the pre-set press the on/off
button once.
c. Pulse Button
To star t the pulse mode, tap the pulse button once and
you will see the button flash white. Re-tap and hold down
the pulse button to start the pulse mode. In pulse mode
the BlendPro will work at the highest speed until you
release the pulse button.
d. Speed setting for Manual Mode
In manual mode, the speed can be set from Level 1 to H.
The selected speed setting is illustrated by the 10 speed
bars (refer to Fig 5) The desired speed is set by tapping the
respective level. If you tap level 5, five bars should flash.
Fig 5
Fig 4
Fig 3
Loading ...
Loading ...
Loading ...