Loading ...
Loading ...
Loading ...
The input voltage should be between 200mV and 10V rms. ac. If the voltage is
more than 10V rms. reading may be out of the accuracy range.
-7-
AUDIBLE CONTINUITY AND DIODE TEST
1.
2.
3.
4.
Connect red test lead to “” jack, black test lead to “COM” jack. The
polarity of red lead connection is positive “+”.
Set range switch to “ / ” position and push the FUNC. button to
select audible continuity or diode test mode.
If audible continuity is selected, connect test leads to two points of circuit
to be tested. If continuity exists, built-in buzzer will sound.
If diode test mode is selected, connect the red and black leads to the
anode and cathode of the diode under test. The forward voltage drop of
this diode in V will be displayed.
SPECIFICATIONS
Accuracy is specified for a period of one year after calibration and at 18℃ to
28℃ (64F to 82F) with relative humidity to 80%.
GENERAL
Maximum voltage between
terminals and earth ground
: CAT II 1000V dc or 750V ac rms. (sine)
Display
: LCD, 3200 counts and 33 segments bar graph
updates 2-3/sec.
Ranging method
: Auto / Manual
Polarity indication
: “-” displayed for negative polarity
Overrange indication
: Only figure “OL” on the display
Jaw opening capability
: 55mm (Max conductor size)
Power
: 9V battery, NEDA 1604 or 6F22 006P
Low battery indication
: “ ” appears on the display
Operating environment
: 0 to 40℃
Storage temperature
: -10℃ to 50℃
Temperature coefficient
: 0.1×specified accuracy) /℃ ( <18℃ or >28℃ )
Altitude
: 2000m
Size
: 282mm×104mm×47mm
Weight
: Approx. 550g.
Loading ...
Loading ...
Loading ...