®
WAI_.R LEVEL WAlTeR "_M_PERA1RJRE
m_
u_u
mJB
RmU_q
ulm
|H_T
m/m
S
Models/Modelos/Modeles 110.14105, 14115, 14205, 14225, 24295, 24425, 24435, 24445
5 = color number, nOmero de color, numero de couleur
WASHER CYCLE DESCRIPTIONS
This information covers several different models. Your washer may vary from the model shown and may not have all the cycles and
features described.
Adjust to load size. Clothes should move freely. To change to a higher
water level after agitation starts, you may turn knob to desired setting.
Your wash/rinse water temperature control is part of the Cycle
Selector (Timer) Control knob. All rinses are cold to save energy.
• For a Hot water wash, you should select SUPER.
• For a Warm water wash, you should select REGULAR.
• For a Cold water wash, you should select SHORT.
You should select a wash cycle based on the soil level and type
of fabric in your wash load.
CYCLE LOAD TYPE AGITATE/SPIN SPEED
Heavy Duty Sturdy or heavily High-speed agitation/
soiled loads High-speed spin
Heavy Duty
Use this cycle to get up to 14 minutes of wash time. You may
select this cycle for most loads.
Permanent Press
Use this cycle to get up to 10 minutes of wash time. When the
Timer reaches Pause, the washer will replace some of the wash
water with fresh cold water to help reduce wrinkling.
Rinse & Spin
May be used when an extra rinse is needed to remove additional
detergent residue. Set the WATER LEVEL Control. You should
then set the Cycle Selector (Timer) Control knob to a Rinse
setting.
Spin Only
A drain and spin may help shorten drying times for some fabrics
by removing excess water. You should set the Cycle Selector
(Timer) Control knob to a Spin setting.
Permanent Normally soiled High-speed agitation/
Press cottons and linens High-speed spin
DESCRIPCIONES DE LOS CICLOS DE LA LAVADORA
Esta informaci6n cubre varios modelos diferentes. Su lavadora puede ser diferente del modelo que se ilustra yes posible que no tenga
todos los ciclos y caracteristicas descritos.
AjL]stelo al tamaBo de la carga. La ropa debe moverse con
libertad. Para cambiarlo a un nivel mas alto de agua despues de
que comience la agitaci6n, puede girar la perilla al ajuste
deseado.
El control de temperatura del agua de lavado/enjuague es parte
del control del selector de ciclos (Temporizador). Todos los
enjuagues son con agua fria para ahorrar energia.
• Para un lavado con agua caliente, usted debe seleccionar SUPER.
• Para un lavado con agua tibia, usted debe seleccionar REGULAR.
• Paraunlavadoconaguafria,usteddebeseleccionarCorto(SHORT).
8537391A
Loading ...
