Loading ...
Loading ...
Loading ...
OPERATING INSTRUCTIONS
].
2.
3.
4.
G.
7.
8.
Ensure tile filter plate and drain filter is clean and flee of food debris. Check tile
drain filter is Ilush with tile filter plate and tile spray arm is correcdy on tile
impeller.
Check there is rinse agent in tile dispenser.
Remove all food scraps from the dishes, before loading the DishDrawer,
Load the dishes.
Overloading the DishDrawer may lead to poor wash performance. Ensure
there are no items blocking the spray arm path.
Pour detergent into die detergent dispenser, then close the dispenser door.
Use die steps on the detergent dispenser as a guide to the correct amount oi
detergent to use. Where the detergent mai/ufacturer has made recommendations
on quantities, we suggest you follow their instruction.
Select the wash program on the secondary control panel.
I ouch the Program button until the desired wash program light shows on the
panel. [ he wash program has now been selected.
Select Eco Save (OptionaD
ffyou would like the wash program to use Jessenergy and time, Eco Save should
be selected by touching this button. I he wash program light will be green.
Close the drawer.
!:).
Start the Wash Program.
Press the Start/Pause button to start tile DishDrawer. Io pause the
DishDrawer, press the Start/Pause button and wait for two additional beeps
before opening the drawer. When in the pause mode the light above the
Start/Pause button will be Ilashing.
10.
End of Program
At the end of the program the DishDrawer will beep six times to let you know
that it has finished and the green light above the Start/Pause button will
disappear. At the end of a wash program it is normal to find some water in the
drain filter area and the drying fan will be on for a short period of time or until the
drawer is opened.
In the event of a power failure, the DishDrawer will stop until the supply power is
resumed. It will drain the water in the DishDrawer and restart in the same part of the
wash prodram it was in when the power failed.
12
Loading ...
Loading ...
Loading ...