Loading ...
Loading ...
Loading ...
EN - 6
Refuelling must be performed with the machine
stopped and with the spark plug cap removed.
Machines with vertical storage possibility (chap.
8.1) have a tank that contains a fuel level indicator. Do
not ll the tank above this level indicator (Fig.24.A).
IMPORTANT Clean any trace of leaked fuel. The warran-
ty does not cover damages caused by the fuel to the plastic
parts.
NOTE Fuel is perishable and should not remain in the
tank for more than 30 days.
7.2.2 Check/top-up engine oil
the engine.
7.3 OCCASIONAL MAINTENANCE
7.3.1 Cutting means
All operations concerning cutting means (disas-
sembly, sharpening, balancing, repair, reassembly and
/ or replacement) must be performed at an Authorised
Service Centre.
Make sure damaged, misshapen or worn cutting
means are replaced, together with the securing screws
to preserve balance.
IMPORTANT Always use original cutting means bearing the
code indicated in the “Technical Data” table.
7.4 CLEANING
7.4.1 Cleaning the machine
•
•
•
•
7.4.2 Cleaning the cutting means assembly
•
chassis.
Models without washing connection
•
-
For side discharge:
1.
2. start the engine.
anti-rust paint.
7.4.3 Cleaning the grass catcher (
7.5 BATTERY
8. STORAGE
1. Start the engine outdoors and leave it running at idle
2.
3.
4.
•
•
•
•
8.1 VERTICAL STORAGE
-
Do not store the machine upright with the tank lled
above the lowest mark of the fuel level indicator (Fig.24.A).
1.
-
2.
3.
4.
the handle in closed position and tighten the levers
Store the machine so as to avoid risk in the event of
accidental contact with people, children or animals.
Do not attempt to store in vertical position machines
that have not been designed for this purpose.
Loading ...
Loading ...
Loading ...