Loading ...
Loading ...
Loading ...
EN - 5
1.
2. Operate the drive
lever.
3. Disengage the drive
lever.
2.
3.
Test driving
If any of the results fail to match the indications
provided in the tables, do not use the machine! Contact
an Authorised Service Centre to have it checked and
repaired if necessary.
6.3
NOTE Start up the machine on a at surface without ob-
stacles or high grass.
6.3.1 Models with manual start handgrip
NOTE The engine brake lever / cutting means must be
kept pulled to prevent the engine stop.
6.3.2 Models with push-button electric start
command
-
Fig.18.A
-
Fig.18.B
.
NOTE The engine brake / cutting means lever must be
kept pulled to prevent the engine stop.
6.4 OPERATION
IMPORTANT When working, always keep a safe dis-
tance from the cutting means, given by the length of the
handle.
6.4.1 Grass cutting
1.
2.
3.
For mulching or rear grass discharge:
•
•
For side discharge: avoid discharging the cut grass
6.4.2 Grass catcher emptying
For grass catcher with contents indicator device:
1.
2.
6.5 STOP
After having stopped the machine, it will take a few
seconds for the cutting means to stop.
Do not touch the engine after stopping it. Risk of
burns.
IMPORTANT Always stop the machine.
• When moving between work areas.
• When driving on grass free surfaces.
• Close to an obstacle.
• Before adjusting the cutting height.
• Any time the grass catcher is removed or retted.
• Any time the side discharge chute (if available) is re-
moved or retted.
6.6 AFTER USE
1.
2. -
IMPORTANT Any time the machine is inactive or unat-
tended:
• Remove the spark plug cap (for models with manual start
handgrip)(Fig.23.B/C).
• Press the tab and remove the permission key (for models
with push-button electric start) (Fig.23.D).
7. MAINTENANCE
7.1 GENERAL INFORMATION
The safety regulations to follow are described in
chap. 2. Strictly comply with these instructions to avoid
serious risks or hazards:
Before commencing any inspections, cleaning or
maintenance/adjustments on the machine:
• Stop the machine.
• Make sure that any moving component has stopped.
• Wait until the engine cools down.
• Remove the spark plug cap (Fig. 23.B).
• Remove the key (Fig.23.D) (for models with
push-button electric start).
• Read the relevant instructions.
• Use suitable clothing, protective gloves and gog-
gles.
7.2 ROUTINE MAINTENANCE
•
IMPORTANT Any maintenance and adjustment opera-
tions not described in this manual must be carried out by
your Authorised Service Centre.
7.2.1 Refuelling
ground.
Loading ...
Loading ...
Loading ...