Loading ...
Loading ...
Loading ...
English 31
Setting up
3
Wrench
Wrench
1
Nut
Nut
2
Bolt
Bolt
3. After adjusting the doors, turn the nut
(1) clockwise (
) until it reaches the
lower end of the bolt, then tighten the
bolt again with the wrench (3) to x the
nut in place (1).
NOTE
If you do not secure the nut rmly, the
bolt may release.
Installing the water dispenser line
A water dispenser is one of the helpful features on your new Samsung Refrigerator.
To help promote better health, the Samsung water lter removes unwanted particles from
your water.
However, it does not sterilize or destroy microorganisms.
You may need to purchase a water purifying system to do that.
The water line also connects to the ice maker.
For the ice maker to operate properly, water pressure of 20 ~ 125 psi (138 ~ 862 kPa) is
required.
If the refrigerator is installed in an area with low water pressure (below 20 psi), you can
install a booster pump to compensate for the low pressure.
After you have connected the water line, make sure the water storage tank inside the
refrigerator is properly lled.
To do this, press the water dispenser lever until water runs from the water dispenser.
NOTE
Water line installation kits are available at extra cost from your dealer.
We recommend using a water supply kit that contains copper tubing.
DA68-02981N-00.indb 31DA68-02981N-00.indb 31 2015. 3. 3.  9:342015. 3. 3.  9:34
Loading ...
Loading ...
Loading ...