Loading ...
Loading ...
Loading ...
User instructions
15
3.2 Washing programs
Before starting a washing program make sure that:
• The water supply tap is open.
• The correct amount of detergent has been added to the
dispenser.
• The baskets have been correctly loaded.
• The spray arms are able to rotate freely and without
obstruction.
• The dishwasher door is securely closed.
CHILD SAFETY DEVICE
(on some models only)
Press the button to activate this device (the light comes on). When it is
active, the beeper sounds three times to confirm that the door is about to
open. So in this case, to open the door keep pressing until the 3rd beep,
then release at once. If the pressure is continued after the third beep, the
door does not open and the operation has to be repeated.
QUICK TIME OPTION
Select this option together with any washing program (except the soak
program) to SHORTEN the cycle
. To activate this option, press button
(light comes on) after selecting the program required.
The option is automatically deactivated at the end of the program.
ENERSAVE
This option allows the further reduction of energy consumption, thanks
to the assisted drying when the door opens at the end of the cycle. At
the end of the wash, a device automatically releases the door, which
slowly opens a few centimeters. This allows the best drying possible,
even at low rinse temperature, permitting an important energy saving.
When the door is completely open, a brief sound signal indicates that the
wash cycle has ended.
Enersave is automatically activated in all programs that include a final
drying phase (see program table). It is possible to disable it before
starting the program.
If this function is active, never prevent the door from opening by any
means, clear the space necessary to allow the opening of the door. Do
not force the closure of the door before the end of cycle signal,
because this would damage the mechanism.
Loading ...
Loading ...
Loading ...