Fire Magic E790I4E1N INSTALLATION INSTRUCTIONS AND OWNER’S MANUAL

Loading ...

POWER SUPPLY FUSE REPLACEMENT

1. Locate the power supply box inside of the island

enclosure (reference the PARTS LIST).

2. Using a phillips screwdriver, remove the 4 large

screws found on the cover of the power supply

box (see Fig. 31-1).

3. Disconnect the power supply cord. Then

disconnect the wire harness and ground wire

(see Fig. 31-2). Completely remove the box from

the enclosure for ease of fuse replacement.

4. Remove the 4 small screws found on the cover

of the power supply box (see Fig. 31-3).

Note: The 2 center screws do not need to be

removed.

5. Carefully open the box by pulling its cover away.

You may need to feed the wire harness into the

box to provide enough slack to open on the

other end. Then “push in and twist” the fuse

holder (red wire), exposing the fuse. See Fig.

31-4.

6. Replace the fuse accordingly (3AG 2 AMP).

Disconnect wire harness and ground wire (and power cord)

Fig. 31-2

Disconnect

here

Remove 4 large screws

Fig. 31-1

Carefully open box and replace fuse (red wire)

Fig. 31-4

Remove 4 small screws

Fig. 31-3

Loading ...

Fire Magic E790I4E1N 36 Inch Built-in Gas Grill