Loading ...
April 2015
WARNINGS
• Keep hands away from blade and moving parts
• Do not use the meat slicer for boned meat, fish or anything other than food
• Do not use machine with wet hands or bare feet
• Do not use extension cables
• Do not immerse unit, cord or plug in liquid at any time
• Unplug cord from outlet when not in use and before cleaning. Make sure the graduated knob is
in “0” position.
• Plug only into a 3-hole grounded electrical outlet
• Do not operate unattended
• Do not use this unit for anything other than intended use
• Do not use outdoors
• Keep children and animals away from unit
• Always operate on a firm, dry and level surface at least 12” from walls or any other obstruction
• Do not use unit with a damaged cord or plug, in the event the appliance malfunctions, or has
been damaged in any manner
• Any incorrect installation, alterations, adjustments and/or improper maintenance can lead to
property loss and injury. All repairs should be done by authorized professionals only
• Ensure that the power supply you are using is adequate for continual usage and the voltage is
correct
• Do not use device when, after it has been sharpened numerous times or the diameter of the
blade has become 10mm thinner
*In the case of prolonged use of the food slicer or a motor block, the thermic safeguard in the mo-
tor is activated. The motor stops automatically; at this point the machine must be turned off. Check
that the warning light is turned off. Give the motor time to cool down before using again.
TO USE
1. Unwrap and place machine with the On/Off switch so that it is in front of the operator.
2. Regulate the thickness of the slice desired by turning the graduated knob.
3. Switch on to activate the blade.
4. Place the food to be sliced on the sliding carriage (pushing against the food holder arm) facing
the blade, making sure that the food is resting against the gauge plate.
5. After use, turn the graduated knob back to position “0”. The food grip should not be removed
unless the shape and size of the food does not allow its use.
Note: For best results, thaw out frozen meat for several hours before slicing.
*If the sharpener is not mounted, proceed as follows:
• Place the sharpener in its support
• Tighten the safety screw
• Block the knob
CLEANING
To maintain cleanliness and increase service life, the machine should be cleaned daily.
• Before cleaning or attempting to move food slicer, unplug from outlet
• Wipe the entire machine and all parts with a clean soft cloth using ordinary neutral detergents.
Use soft cloths for drying.
• When the sliding food tray moves with difficulty, lift the food slicer and place on its side.
• Carefully clean the cylindrical sliding bar and lubricate with Vaseline oil.
• Remove knife guard periodically, unscrewing the screw (in the center of the knife guard) then
clean both the blade and the inside of the knife guard with alcohol
Loading ...
Loading ...
Loading ...