Loading ...
Loading ...
Loading ...
Optimum temperature and air quality
32
When you touch the sensors, you will
see the following changes in the dis-
play:
- With the first touch:
The last temperature set flashes.
- Each subsequent touch:
The temperature changes in 1° incre-
ments.
- Keeping your finger on the sensor:
The temperature changes continu-
ously.
A negative tone will sound (if the sen-
sor tone is switched on) when the
lowest or highest possible tempera-
ture is reached.
Approximately 5seconds after a sensor
has last been touched, the current
temperature inside the wine condition-
ing zone is shown automatically.
When the temperature is altered, there
is a short delay until the temperature
selected is set.
The temperature display in the control
panel always shows the actual tem-
perature.
Temperature range
In both zones, it is possible to set the
temperature between 41°F and 68°F
(5°C and 20°C).
Temperature display
In normal operation, the temperature
display shows the actual temperature in
the zone.
If the temperature in one of the zones is
not within the range that the appliance
is able to display, dashes will light up in
the temperature display.
Depending on the ambient temperature
and the temperature setting, it can take
the appliance a few hours to reach the
temperature required and for this tem-
perature to then be shown as a con-
stant temperature in the display.
Loading ...
Loading ...
Loading ...