Loading ...
Loading ...
Loading ...
7, Select LOAD SIZE
Small Medium
Extra
Small Large
Load Size
Select the Load Size setting most suitable for your load. Extra
small or small will add a low amount of water for smaller loads
and Large will add the most amount of water for large or bulky
loads. Garments need to move freely.
Select WASH TEMP/
TEMPERATURE
Cool Warm
Cold Cold
Cold
Cold
Hot
Cold
Wash Tamp
All Cold Rinses
Once you select a cycle, select the desired temperature by
turning the Wash Temp/Temperature knob to the appropriate
setting based on your load. All rinses are cold.
NOTE: Always read and follow fabric care label instructions to
avoid damage to your garments.
WashTemprremperatore........................................................................................................................
Some cold water is added to save Whites and pastels
energy. This will be cooler than Durable _arments
your hot water heater setting. Hea souls/
W
Warm
Some cold water will be added, so Bright colors
this will be cooler than what your Moderate to light soils
previous washer provided.
cool
Warm water may be added to Colors that bleed
assist in soil removal and to help or fade
dissolve detergents.
Cold
This is the temperature from your Dark colors that
faucet. If your tap cold water is bleed or fade
very cold, warm water may be Light soils
added to assist in soil removal
and help dissolve detergent.
, Select options, if desired (on some
models)
No Yes
Fabric 5oftener
If you are using fabric softener, be sure to set the Fabric
Softener option knob to YES.
Press START/Pause/Unlock Lid
to begin wash cycle
Stort
Pause/Unlock Lid
©
Cancel Hold 3 Sec
Press the START/Pause/Unlock Lid button to start the wash
cycle. When the cycle has finished, the CYCLE COMPLETE
indicator will light. Promptly remove garments after cycle has
completed to avoid odor, reduce wrinkling, and rusting of
metal hooks, zippers, and snaps.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/Pause/Unlock Lid; the lid will unlock once
the washer movement has stopped. This may take several
minutes if the load was spinning at high speed. Then close
lid and press START/Pause/Unlock Lid again to restart
the cycle.
If lid is left open for more than 10 minutes, the water will
pump out automatically.
WASHER MAINTENANCE
,r
WATER INLET HOSES
Replace inlet hoses after 5 years of use to reduce the risk
of hose failure. Periodically inspect and replace inlet hoses
if bulges, kinks, cuts, wear, or leaks are found.
When replacing your inlet hoses, mark the date of
replacement on the label with a permanent marker.
NOTE: This washer does not include inlet hoses. See the
"Installation Instructions" for more information.
Loading ...
Loading ...
Loading ...