Loading ...
Loading ...
Loading ...
12
Top-mounting in a cabinet
• Determine where in the top cabinet you want to install the rangehood, then drill 4 holes of Ø4mm at
the bottom of the hanging board of your cabinet (Fig. 12).
Fig. 12
30.5mm
215mm
450mm
• Install the rangehood onto the bottom of the cupboard and secure it in place with four ST4x30mm
screws (Fig 13).
• If there is a space between the wall and the rear of the rangehood, install the rear-underside support
mounting bracket (Part ID 2, Installation kit) using the two ST4x8mm screws.
WARNING: Failure to install the screws or fi xing device in accordance with these instructions may
result in electrical hazards!
Fig. 13
Loading ...
Loading ...
Loading ...