Loading ...
Loading ...
Loading ...
NOTE: Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow
opening, if it is necessary to remove the handles, follow the directions below.
HOW TO REMOVE FREEZER DOOR HANDLES
NOTE: Handle appearance may vary from the illustrations
on this page.
Removing Freezer Drawer Handles
Loosen the set screws located on the lower side of
the handle with a 1/8in. Alien wrench and remove the
handle.
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a 1/4 in. Alien wrench.
HOW TO REPLACE FREEZER DOOR HANDLES
NOTE: Handle appearance may vary from the illustrations
on this page.
Replacing Freezer Drawer Bandies
Place the handle on the door by fitting the handle
footprints over the mounting fasteners and tightening the
set screws with a 1/8 in. Alien wrench.
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a 1/4 in. Alien wrench.
When assembling or disassembling the handles:
• Grasp the handle firmly to ensure it will not drop or
cause injury.
• Prevent the handle from swinging toward nearby
people or animals.
• insert the bracket hole of the handle into the stopper
bolt of the door exactly, then assemble the set screws
to fix the handle in place.
• Check for any gap between the door and handle after
the handle is fixed in place.
12
Loading ...
Loading ...
Loading ...