Loading ...
Loading ...
Loading ...
Flex Series for North America
4
2.5 Main Body of Hoisting Air Conditioner
(1). The primary step for installing the indoor unit.
◆
When attach the hoisting stand with hoisting screw, do use nut and gasket respectively at
the upper and lower of the hoisting stand to x it. The use of gasket anchor board can prevent
gasket from breaking off.
(2). Use installation cardboard
◆
Please refer to the installation cardboard about the dimension of ceiling opening.
◆
The central mark of the ceiling opening is marked on the installation cardboard.
◆
Install the installation cardboard on the unit by bolts (3 pieces), and fix the angle of the
drainage pipe at the outlet vent by bolt.
(3). Adjust the unit to the suitable install place. (Refer to the Fig.4)
(4). Check if the unit is horizontal.
◆
Inner drainage pump and oat switch are included in the indoor unit, check if 4 angle of
every unit are horizontal by water level. (If the unit is slant toward the opposite of the coagulate
water ow, there may be malfunction of the oat switch and lead water drop.)
(5). Back-out the gasket anchor board used to prevent gasket from breaking off and tighten the
nut on it.
(6). Back-out the installation cardboard.
Nut(supplied at scene)
Gasket(attachment)
Gasket anchor board(attachment)
Bolt of one of the angle of outlet pipe is
fix on the angle of the drainage solt
Bolt(attachment)
Bolt(attachment)
Water lever
Polyethylene pipe
Center of the ceiling
opening
Insert
Install cardboard
Hoisting stand
Tighten(double nuts)
[Fix the hoisting stand firmly] [Fix the gasket firmly]
[Fix the install cardboard]
Fig.4
Note!
● Please do tighten the nuts and bolts to prevent air conditioner from falling down.
2.6 Connection of the Refrigerant Pipe
◆
When connect the pipe to the unit or remove it from the unit, please do use both spanner
Loading ...
Loading ...
Loading ...