Loading ...
Loading ...
Loading ...
©2018 Hestan Commercial Corporation
23
(continued)
LOCATION AND INSTALLATION
MOVING THE UNIT INTO FINAL POSITION
2
3
1
frames are provided.
Push the appliance into the opening.
1
If the unit is to be installed inside an enclosure or within an
enclosed structure, it is necessary to design a ventilation
shaft at the back of the enclosure to assure proper
panels on the door and drawer before pushing the unit into
2
To make this operation easier keep the door and the drawer
Check the leveling of the appliance, adjusting the feet and
Mount the included covers by rst inserting them laterally
wheels to correct it if necessary.
then pushing rmly until a “click” is heard.
3
IMPORTANT: The following instructions for installation apply to all models.
For a built-in installation, to close gaps between the appliance and
ventilation at the back of the unit. A 5 mm (1/4”) gap is
sufcient to prevent overheating. Always mount front
its nal position inside the enclosure.
previously installed side proles.
open.
Secure the appliance to the adjacent cabinets using the
EN
Loading ...
Loading ...
Loading ...