Loading ...
Loading ...
Loading ...
Options
56
Delay Start with EcoStart
There are three ways of delaying the
start of a program. You can set the start
time or the finish time of a program. You
also have the option of taking advan-
tage of time variable economy rates for
electricity by using the EcoStart func-
tion.
When using the Delay Start function,
make sure that the detergent com-
partment is dry before adding deter-
gent. Wipe dry with a cloth if neces-
sary. If the compartment is wet, pow-
der detergent can become lumpy
and stick to the dispenser, with the
result that it is not fully dispensed.
Do not use liquid detergent when se-
lecting Delay Start, as it can run into
the dishwasher before it is required.
To prevent children coming into
contact with dishwasher detergent:
Do not fill the detergent dispenser
until just before starting the pro-
gram, i.e., before you activate the
FlexiTimer with OK. Also activate the
child lock.
Turn the dishwasher on using the
sensor.
Select the program you want from the
main menu.
Select the Delay Start option from the
program menu for the selected pro-
gram.
You then have a choice of Start at, Finish
at and EcoStart.
Select the desired function.
Now enter the required time.
If, while you are setting the time, you do
not press any sensors for several sec-
onds, the display will revert to the previ-
ous menu. You will then have to enter
your settings again.
If you keep the + or - sensor pressed,
the value shown will automatically in-
crease or decrease.
If the time of day display has been
switched off (see "Settings menu,
Time"), the display message will go
out after 10minutes following activa-
tion of a delay start time.
To switch the display message back
on for a few minutes, press the
sensor.
Loading ...
Loading ...
Loading ...