Loading ...
Loading ...
Loading ...
15
Getting Started
English
The Setup Wizard window appears the first
time you turned on the TV. It will assist you
to configure the TV and scan for available
channels.
IMPORTANT: Make sure the antenna or
cable TV system connection is made.
1. Press POWER button on the TV control
panel or
button on the remote control
to switch on the TV. The power indicator
will change to green. The Setup Wizard
window appears on the screen.
NOTE: It may take a few seconds before
the Setup Wizard window appears on the
screen.
2. Use or key to highlight TV Location,
then press or to select Home Mode
or Store Mode.
NOTE: When you select Store Mode it
will remind you Store Mode consumes
more energy. Select Ye s to enter or No to
cancel.
Press or to highlight Go to next
step, press OK or to go to the next step.
3. Use or key to highlight Menu
Language, then press or to select the
desired language.
Press or to highlight Go to next
step, press OK or to go to the next step.
4. Use or key to highlight Time Zone,
then press or to select desired
time zone. Use or key to highlight
Daylight Saving Time, then press or
to select On or Off. Use or key to
highlight Time Format, then press or
to select 12-hour or 24-hour. Press or
to highlight Go to next step, press OK
or to go to the next step.
5. Use or key to highlight Air/Cable,
then press or to select Air or Cable
base on your connection.
Press or to highlight Go to next
step, press OK or to start the auto scan.
The Setup Wizard will scan for available
channels automatically. The scanning may
take some time.
Loading ...
Loading ...
Loading ...