Loading ...
Loading ...
Loading ...
I Please pay special attention to these hazard alert boxes, and follow any instructions given.
WARNING statements alert you to such hazards as fire, electric shock, burns and personal
injury. CAUTION statements alert you to such hazards as personal injury and/or property
damage.
kWARNING
Electrical Shock Hazard
Do not plug into the electrical supply
until the assembly is complete. Failure
to do so could result in electrical
shock or injury,
Before assembling vacuum cleaner, check
the PACKING LIST on the cover of the sepa-
rate Repair Parts List. Use this list to verify
that you have received all the components of
your new Kenmore vacuum cleaner.
HANDLE ASSEMBLY
Remove the screw located just below the
top edge of the back of the vacuum clean-
er. Position the handle
as shown in the illus- .__.J /
tration below. Handle _
the opening :__ _J_lkF
at the top of _ _1_'/ _..',_.
the vacuum J _/ _' HI
cleaner. 1/
Insert the /11 tl H,ndl,
screwso,t/ll LI so, .
passes Hole
through the handle into the vacuum clean-
er.
kCAUTION
Do not overtighten.
Overtightening could strip the screw
holes,
Do not operate the vacuum cleaner with-
out the screw in place.
Using a screw-
driver, tighten
the screw.
Begin to tighten the screw with your fin-
gers. It may be necessary to adjust the
handle slightly.
5
Loading ...
Loading ...
Loading ...