Loading ...
Loading ...
Loading ...
Functions
ON/OFF
Press to turn the unit on/o.
LED display
The LED displays indicates the timer setting or set temperature. When the set
temperate or the timer is adjusted, the new setting is shown on the display. The LED
display is also used to show error codes should a fault occur.
COOL MODE
1. The exhaust hose needs to be installed for this mode.
2. To set this mode correctly, press the MODE button until the COOL indicator light
illuminates on the control panel.
3. Set the target temperature between 18-32°C by pressing the increase (+) or
decrease (-) buttons until the desired temperature is displayed on the LED
display.
4. Select the fan speed by pressing the FAN SPEED button. This unit has 2 fan
speeds to choose from. High speed will reach the set temperature as fast as
possible and LOW, speed is ideal for low noise environments.
TIP: The most suitable temperature setting for a room during summer is 24°C.
FAN MODE
1. When using the appliance in FAN MODE only, the air exhaust hose need to be
removed.
2. Press the MODE button until the FAN indicator light illuminates on the control
panel.
3. Select the fan speed by pressing the FAN SPEED button, there are 2 speeds as
mentioned above.
DRY / DEHUMIDIFY
1. To reduce room humidity (e.g...... damp rooms, or during rainy periods).
2. In DRY MODE the appliance should be prepared in the same way as COOL
MODE, with the exhaust hose attached, so the moisture is taken from the room
and expelled outside.
3. Press the MODE button until the DRY indicator light comes on. The LED display
will show "dh" once activated.
4. The fan speed is selected automatically by the unit and defaults to LOW SPEED.
NOTE: Keep windows and doors closed for the best dehumidifying eect.
SWING FUNCTION
This unit does not have an automatic-swing function. Please adjust the Horizontal
louvres by hand until they are in the desired position.
NOTE: The unit must be OFF and disconnected from the power outlet when adjust-
ing the louvres.
17
Loading ...
Loading ...
Loading ...