Loading ...
Loading ...
Loading ...
"HARD TOP" GRASS CATCHER
ASSEMBLE FRAME AND BAG
• Thread upper tubular frame into hem of
bag as shown. Be sure angled ends of
frame point downwards.
• Slip lower frame into tubular upper frame
as shown.
• Slip vinyl bindings over frame.
• Install two (2) blunt pointed screws in
front holes and tighten securely.
Sharp pointed screws
(Rear and side holes)
Catcher top
Hem ¸
Start here
Upper tubular frame _
%
/
Catcher bag and frame
Blunt pointed screws
(Front holes)
TO ATTACH HARD TOP CATCHER
• Open the rear door on mower housing.
• Place frame side hooks into slots in
handle brackets.
• Release rear door, allowing it to nest into
top of catcher.
Vinyl bindings
Upper tubular
frame
Rear door
Grass catcher
frame hook
slots
ASSEMBLE TOP TO FRAME AND BAG
NOTE: For ease of assembly, place
catcher top upside down on work surface.
• Nest bag and frame assembly into
catcher top.
• Install two (2) sharp pointed screws into
rear holes first and tighten securely.
• Pull catcher bag forward on frame to
remove slack.
• Install two (2) remaining sharp pointed
screws in side holes and tighten se-
curely.
• Align lower frame and catcher top front
holes.
ACAUTION: Under normal usage, the
catcher material is subject to deterioration
and wear and should, therefore, be
checked frequently for replacement. Any
replacement catcher should be checked to
ensure compliance with original manufac-
turer's specifications.
_,CAUTION: Do not run lawn mower
without the discharge guard (rear door),
approved grass catcher, clipping deflector
or mulcher plate in place. Never attempt
to operate mower with the discharge guard
(rear door) removed or propped open.
Loading ...
Loading ...
Loading ...