Loading ...
Loading ...
Loading ...
Operator MOWING
presence POSITION
control bar _.//
/
/
Upper
UP handle
Handle
knob
Lower handle
3 POSITION "QUICK" HANDLES
Raise lower handle section to operating
position and squeeze the bottom ends
of lower handle towards each other until
the pin in handle can be inserted into
one of the three height adjustment holes.
3 POSITION "QUICK"
SQ
Handle pin
Handle
adjustment
bracket
J
3 POSITION "EURO" / "EZ" HANDLES
Raise lower handle section to operating
position and align hole in handle with
one of three height positioning holes.
Insert handle bolt through handle and
bracket and secure with knob.
Repeat for opposite side of handle.
3 POSITION "EURO"
Handle
adjustment
bracket
Knob Bolt
I
ALL HANDLES
Raise upper handle section into place on
lower handle, remove protective padding
and tighten both handle knobs.
Remove handle padding holding opera-
tor presence control bar to upper handle.
Your lawn mower handle can be ad-
justed for your mowing comfort. Refer to
"ADJUST HANDLE" in the Service and
Adjustments section of this manual.
NOTE: For shipping purposes, the rear
wheels on your lawn mower may not be
adjusted to the same position as the front
wheels. Before operating mower adjust all
wheels to the same cutting height.
Knob
3 POSITION "EZ"
.J'_ Bolt
J Handle
adjustment
bracket
INSTALL REAR WHEELS
(HIGH WHEEL MOWERS ONLY)
Some high wheel models require washers
which will be provided in a parts bag. If provid-
ed, install washers on the axle first as shown.
Install one (1) rear wheel on the axle of
rear wheel adjuster.
Install 3/8-16 Iocknut and tighten securely.
Repeat procedure for other rear wheel.
Wheel Axle
assembly
Flanged
5 Iocknut
Wave
Washers
Loading ...
Loading ...
Loading ...