Loading ...
Loading ...
Loading ...
- 14 -
FIG.8
9.2 BBQ/CHARCOAL LIGHTER – FIG. 8
The BBQ and charcoal lighter is always to be used
without the extension handle.
1. Attach the BBQ/charcoal lighter nozzle (10) onto
the device.
2. Select temperature setting II.
3. Place the nozzle under the coal or wood. Ensure
that the device is properly positioned. The stand
should be used to rmly support the device in the
proper position.
4. Remove the device from the coals or wood as soon
as it starts to glow.
5. Blow hot air into the coals or wood from a distance
of 5-10cm, until they are burning properly. Doing
this will help to avoid damage to the nozzle
attachment.
6. Once nished change switch to “1” for at least a
minute to cool the burner slowly.
7. Switch to “0” o position, and rest the burner in a
safe position to nish cooling before storing.
(10)
9. OPERATING THE ELECTRIC WEED BURNER
9.3 HINTS AND TIPS
• The weed burner is best suited to control small young weeds 2-3inches (50-75mm) in
height.
• For best results, any weeds you wish to work on that are bigger than that should be
trimmed down to approx. 2 inches (50mm) in height before using the weed burner.
• Do not attempt to burn the plant completely, only the heat is needed. Most weeds will
blacken and die completely within 2 or 3 days. Stronger weeds, woody stems and those
with deeper routes may require multiple applications.
• The weed burner is not suitable for use on decking.
• Be careful not to use for extended periods over the same area as it may cause damage or
become a fire risk.
Loading ...
Loading ...
Loading ...