Loading ...
Loading ...
Loading ...
INSTALLATION
Check the appliance is electrically safe and gas sound when you have nished.
27
F
E
(900 mm)
35
7
/
16
“
A
BB
A
C
D
Positioning the range
Fig. 10.1, Fig. 10.2 and Fig. 10.3 show the minimum
recommended distances and clearances from the range to
nearby surfaces (see Table 10.1).
We recommend a gap of no more than ⁄” (5 mm) (see Table
10.1) either side of the appliance for moving the range. It
must be possible to move the range in and out for cleaning
and servicing.
Above hotplate surround should be level with, or above, any
adjacent work surface (Fig. 10.1).
*Any rangehood should be installed in accordance with the
hood manufacturer’s instructions.
**Any splashback must be tted in accordance with the
manufacturer’s instructions. Allowance should be made for the
additional height of the ue trim, which is tted to the rangetop.
Surfaces of furniture and walls at the sides and rear of the
appliance should be heat, splash and steam resistant. Certain
types of vinyl or laminate kitchen furniture are particularly
prone to heat damage and discoloration.
We cannot accept responsibility for damage caused by
normal use of the range to any material that de-laminates or
discolors at temperatures less than 149°F/65°C above room
temperature.
The depth of the range is 27’’ (697 mm) overall (Fig. 10.4).
For safety reasons, curtains must not be sited immediately
behind the range.
Fig. 10.1
Fig. 10.2
Fig. 10.3
43 ⁄” (1110 mm)
35 ⁄” (911 mm)
36 ⁄” (936 mm)
27” (697 mm)
Open oven door
shown dotted
26 ⁄” (666 mm)
25” (634 mm)
3 ⁄” (65 mm)
Fig. 10.4
Loading ...
Loading ...
Loading ...