INSTALLATION:
1. Install the length of rod
that is required by threading
wire through the rod and
screwing it to the fixture. Install
swivel to the rod, ensuring that
the sleeve is at the swivel.
2. Loosen “B”. Adjust stud to
desired length and lock in place
with “B”
3. Mount the mounting
bracket to electrical box using
electrical box screws (not
included). Make sure the studs
on the mounting bracket are
facing out from the electrical
box.
4. Connect the ground wires
(bare copper or green) from your
fixture to the ground wire (bare
copper or green) or ground screw
in the electrical box. Connect the
black wire (or wire with marking)
from the fixture to the black wire
in the electrical box and connect
the white wire from the fixture to
the white wire in the electrical box.
5. Once connections of wires are
completed, carefully tuck wires
and wire nuts into the electrical
box making sure no bare wire (on
the black and white) is visible at
the wire nuts.
6. Position fixture over studs on
mounting bracket assembly.
Secure fixture in place with star
washers and cap nuts.
7. Install specified bulb type and
wattage (not included).
8. Screw glass shade on to the
fixture.
Tel: (613) 342-5424, Fax: (800) 263-4598
Sleeve
Rod
Swivel
IPL741A01XX9
09/18
Star
Washer
Cap
Nut
Fixture
Stud
“B”
Studs
Electrical Box Screws
(not included)
Electrical
Box
Mounting
Bracket
White
Black
House supply
Ground wire
Fixture
Ground wire
SAFETY PRECAUTIONS:
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
QUESTIONS OR CONCERNS CONTACT AT:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A
CLEAN, SOFT CLOTH.
NOTE: Product may not look exactly as shown in figures.
PENDANT
LIGHT
TOOLS AND MATERIALS REQUIRED:
Phillips
Screwdriver
Wire Cutters
Pliers Wrench
Wiring supplies
as required by
local electrical
code
Fixture
Bulb
Glass
!
WARNING
Warning - HOT :
Do not touch any metal surface.
Loading ...
