Loading ...
Loading ...
Loading ...
General Cleaning
continued)
Be sure the range iscool
before removing elements or drip
bowls.
Be careful not to bend terminal ends
when replacing elements after cleaning.
Terminal
End
Main Top
IIr_'_l!_l_Vhen lowering the lift-
up range top, grasp the sideswith
finger-tipsonly. Be careful not to pinch
fingers. DO NOT drop or bend the
range top when raising or lowering.
This could damage the surface.
Surface Elements and Drip Bowls
Surface elements can be unplugged and removed to make cleaning the drip
pans easier. The surface elements clean themselveswhen they are turned on.
Food spilled on a hot element will burn off. Food spilled on a cool element may
be cleaned with a damp cloth--any remaining soil will burn off the next time the
element isused. Never immerse a surface element in water.
To Remove the Surface Elements and Drip Bowls
1. Lift up the edgesof the drip bowl acrossfrom the terminalend. Lift the
surface element and drip bowl together. DO NOT removethe hold
down clip from the drip bowl. The hold down clip helps to properlyposition
the element.
2. Gently slide the surface element and drip bowl up and out of terminal plug.
To Clean Drip Bowls
Wash in hot, soapy water or in the dishwasher. Rinseand dry while still warm.
Hard to remove,burnedon soil can be removedbysoakingthe drip bowls for
about 20 minutes in a lightlydiluted liquidcleanseror a solutionof ammonia
and water (1/2 cup ammonia to 1 gallon of water). A nylon scrubbermay be
usedafter soaking. DO NOT useabrasive cleanersor steelwool, asthey will
scratchthe surface. Rinsewith cleanwater and polish dry with a soft cloth.
To Replace Drip Bowls and Surface Elements
1. Slidethe terminal end on the element throughthe opening inthe drip bowl.
2. Pressdownon the surface element untilthe element support snaps into the
hold down clip. Besure the elementsupport isalignedwith the slot in the
hold-downclip. The surface element mustbe levelto reducethe hazard of
panssliding off the element.
3. Line up the terminal end with the terminal plug.
4. Hold the surface element and drip bowl together aslevel aspossible and
slide the terminal end into the terminal plug.
To Raise and Lower the Top for Cleaning
1. Remove burner grates and spillover bowls. Set aside.
2. Grasp the sidesof the cooktop and then lift from the front.
3. Lift thetop high enoughto allowthe support rodstosnap into place.The Lift-
up rods will supportthe top in itsraisedposition.
4. Clean underneath usinghot, soapy water and a clean cloth; then, dry.
5. To lower the range top, grasp the front corner of each side of the top while
pushing backon each rod with the heel of your hand. This will releasethe
notchedsupport. Holdthe rangetop and gently slidethe range top down tothe
range.
10
Loading ...
Loading ...
Loading ...