Loading ...
Loading ...
Loading ...
IROUBIESHOOIING
BEFORE CALLING FOR SERVICE
Broil or self-clean The oven temperature is too high. Allow the oven to cool below locking temperature.
doesn't work This can take up to 1 hr after the cycle is complete.
Oven not clean after a
self-clean cycle
Improper oven controls setting.
The oven was heavily soiled.
"CLOSE DOOR TO
CONTINUE BROILING"
or "DOOR OPENED"
appears in the display
"DOOR LOCKED" light
is on when you want to
cook
Oven control beeps
and displays any F
code error.
Oven racks are
difficult to slide
Power outage, clock
flashes
"Burning" or "oily"
odor emitting from the
vent
Strong odor
The broil or self-clean cycle has
been selected but the door is not
closed.
The oven door is locked because the
temperature inside the oven has not
dropped below the locking
temperature.
You have "F3".
You have "F11 ".
If the function code repeats.
The oven racks were cleaned in a
self-clean cycle.
Power outage or surge.
This is normal in a new oven and
will disappear in time.
An odor from the insulation around
the inside of the oven is normal for
the first few times the oven is used.
See the Using the "USING THE SELF-CLEANING
OVEN" section.
Clean up heavy spillovers before beginning the
self- clean cycle. Heavily soiled ovens may need to
self-clean again or for a longer period of time.
Close the oven door.
Touch the "CLEAR OFF" pad. Allow the oven to
cool.
Touch the "CLEAR OFF" pad. Allow the oven to
cool for one hour. Put the oven back into
operation.
Check the main gas shut-off valve or the oven gas
shut-off valve(see "Surface burners light but oven
burner does not" column).
Disconnect all power to the range for 5 minutes
and then reconnect power. If the function error
code repeats, call for service.
Apply a small amount of vegetable oil to a paper
towel and wipe the edges of the oven racks with
the paper towel. Do not use lubricant sprays.
Reset the clock. If the oven was in use, you must
reset it by touching the "CLEAR OFF" pad,
setting the clock and resetting any cooking
function.
To speed the process, set a self-clean cycle for a
minimum of 3 hours. See the "USING THE SELF-
CLEANING OVEN" section.
This is temporary.
Loading ...
Loading ...
Loading ...