Loading ...
Loading ...
Loading ...
6
www.outdoorrooms.com
42511 REV B : 03-16-2021
WIRING DIAGRAM - (CFP-ESO-CP)
SENSOR/IGNITER
3.3 VDC+
3.3 VDC-
CONTROL
MODULE
GAS CONTROL
VALVE
STANDARD
CONTROL
SWITCH
ESO
(NORMALLY CLOSED)
!!
WARNING
If any components were damaged during the incident that prompted the use of the emergency stop
button, they must be replaced before the appliance is operated again. In some instances, the entire
appliance should be replaced.
After emergency stop is pressed and situation is resolved, DO NOT immediately reset the
emergency stop button. Follow these steps to reset:
Turn all controls to the OFF position. This includes the CF-DSI switch, the 4-hour
timer, and/or the wall switch.
Verify that appliance is not covered or obstructed.
Reset the emergency stop button by twisting clockwise.
1.
2.
3.
SUPPLY FROM GFCI
RECEPTACLE
110-120VAC
Loading ...
Loading ...
Loading ...