Loading ...
Loading ...
Loading ...
6
WARNING: Ensure the product is unplugged from the electrical outlet
before assembling it. Handle the blades with care as they are
extremely sharp. Use caution when attaching, detaching, cleaning,
or stopping the blades.
Operating times and speed settings will be specied for accessories if
applicable.
Accessories, other than those provided with the appliance shall include
instructions for their safe use with this appliance.
NOTE: Before using the product for the rst time, dissemble and
thoroughly wash and dry all parts except the power base (large cup,
small cup, storage lids, and both sets of blades).
T O A S S E M B L E
Chopper/Blender:
1. Ensure the product is unplugged from the electrical outlet.
2. Place the power base on a at, level, stable surface.
3. Fill the small cup or the large cup with the food that you wish
to chop/blend.
4. Screw the at blades or cross blades clockwise onto the small or
large cup until secure.
NOTE: Ensure that the rubber gasket, located on the inside bottom
edge of the blade assembly, is in place.
5. Turn the chopper assembly so that the blades are on the bottom.
Attach the assembled chopper by aligning the three tabs on the
outside of the small or large cup with the three notches on the top
inner edge of the power base.
6. Plug the product into a standard 120 volt AC electrical outlet.
7. Press down and turn counter clockwise to begin processing food.
To stop processing, press down and twist clockwise. Wait until the
blades stop completely before removing the cup from the power base
or before removing any food contents.
8. Unplug the product from the electrical outlet when it is not in use or
is left unattended.
Loading ...
Loading ...
Loading ...