Loading ...
Loading ...
Loading ...
Installation
97
EN
Assembling the skirt
The skirt must always be positioned and
secured correctly on the appliance.
1. Unscrew the 2 nuts (B) on the back of the
worktop.
2. Position the skirt above the worktop,
taking care to align the pins (C) with the
holes (D).
3. Secure the skirt to the worktop by
tightening the screws (A).
5.4 Electrical connection
General information
Check the mains characteristics against the
data indicated on the plate.
The identification plate bearing the
technical data, serial number and brand
name is visibly positioned on the appliance.
Do not remove this plate for any reason.
Perform the ground connection using a wire
that is 20 mm longer than the other wires.
The skirt provided is an integral
part of the product; it must be
fastened to the appliance prior to
installation.
Power voltage
Danger of electrocution
• Have the electrical connection
performed by authorised technicians.
• Use personal protective equipment.
• The appliance must be connected to
ground in compliance with electrical
system safety standards.
• Disconnect the mains power supply.
• Do not pull the cable to remove the
plug.
• Use cables withstanding a temperature
of at least 90 °C.
• The tightening torque of the screws of the
terminal board leads must be 1.5 - 2 Nm.
Loading ...