Loading ...
Loading ...
Loading ...
10
TROUBLESHOOTING
Symptoms
Remedies
Compressor will not start • Check if the power cord has been plugged in.
• Check for blown fuse.
Poor performance • Move the unit from direct sunlight, and avoid
installing heating devices near the unit.
• Install the unit in a well-ventilated place with
a minimum of 6” clearance at the back.
• Check the condenser, and clean if heavy
dust has collected.
• Check to see if contents are blocking the air
duct.
• Check the temperature controller for possible
incorrect temperature setting.
• Check to see if refrigerant charge is low.
•
Make sure the door is completely closed.
No interior light • Turn off the light switch and turn it on again.
• Make sure the LED lighting assembly is
correctly installed.
•
Replace the LED assembly if necessary.
Unit is noisy • Make sure unit is installed on a level surface.
• Make sure to maintain the minimum
clearance of 6” from the wall.
• Check for loose parts or mounting.
• Make sure the tubing is free from any contact
to avoid rattling.
Condensation on cabinet
and/or floor
•
Reduce the relatively humidity in the area
where the unit is installed.
• Gasket on door or head section is not sealing
properly. Repair or replace gasket as
necessary.
Loading ...