Loading ...
Loading ...
Loading ...
20
EN
www.napoleongrills.com
N415-0522 OCT 05.18
BIP500RB BUILT-IN INSTRUCTIONS
This grill is designed for masonry, NON-COMBUSTIBLE enclosures only, and must be installed and serviced by a
qualied installer to local codes.
1. Aach the side mounng brackets to each side of the grill using (4) 1/4 - 20 x 7/8” screws (N570-0087). Pre-installed
at factory.
2. Lay the rear trim piece across the back of the opening. To keep it in place, a dab of silicone may be applied to each
wing of the rear trim.
3. Lower the unit in place, the wings on the rear trim should be under the side mounng brackets. Connect the ex
supply line to the ng at the end of the manifold.
4. The enre installaon must be leak tested before operang the unit.
N570-0087 (1/4” -20 X 7/8”)
(Pre-installed at factory.)
x4
APPLY A DAB OF SILICONE
TO EACH FLANGE TO
SECURE IN PLACE.
1
2
4
3
3
5
6
7
Loading ...
Loading ...
Loading ...