Loading ...
Loading ...
Loading ...
6
Note: The Koldfront Through the Wall Air Conditioner Sleeve (Model: WTCSLV) is designed
specifically for Koldfront’s line of through the wall air conditioners and makes installation simpler
than using non-Koldfront branded sleeves. The WTCSLV can be purchased from an authorized
retailer or the dealer from which you purchased your Koldfront air conditioner.
Preparing the Wall Sleeve
Your Koldfront Through The Wall Air Conditioner unit is intended to be installed into a compatible
wall sleeve enclosure. A wall sleeve provides the proper support and enclosure for your air
conditioner and allows for the wall opening to be properly sealed prior to final installation.
To properly install your new Koldfront Through The Wall Air Conditioner into a wall sleeve, it is
required that you use the Rear Louver Panel / Grille that was shipped with your new air
conditioning unit. This will ensure proper air flow from the back of the unit. If your installation
utilizes a previously installed wall sleeve, please replace the Rear Louver Panel / Grille with the
one provided with your new air conditioner.
Attach Seals and Support Blocks to Wall Sleeve
With the wall sleeve properly assembled, it is now time to prepare the wall sleeve enclosure
for the air conditioner unit. The process involves positioning seals and foam support blocks
inside of the wall sleeve enclosure in order to enable a proper fit for the air conditioning unit.
Important: The below instructions are to be used in conjunction with the Koldfront Wall Sleeve
model WTCSLV. Instructions for other compatible wall sleeves can be found in the “Alternate
and Supplemental Installation Instructions” section.
Loading ...
Loading ...
Loading ...