Loading ...
Loading ...
Loading ...
5
selected in accordance with our recommendation.
Check
1. Ensure that the engine is stopped on a level ground.
2. Remove the dipstick and clean it.
3. Reinsert the dipstick into the oil filler without screwing it, and check oil level.
4. If the oil level is too low, add the recommended engine oil up to the oil filler neck.
5. Reinstall the dipstick.
CAUTION: Run with insufficient engine oil may damage the engine severely.
OIL IN THE REDUCTION GEAR BOX (only for the model
equipped with it) 1/2 Reduction gear with an auto-centrifugal
clutch
Brand of the box oil is the same as that of engine oil.
Oil capacity: 0.5liters for 190N, 0.3liters for 170N. Check the oil
lever in the following order.
1. Remove the dipstick and clean it.
2. Reinsert the dipstick without screwing it in, and then check
oil level
.
3. If the oil level is too low, add the
recommended engine oil until it arrives the
upper level mark.
4. Reinstall the dipstick.
AIR CLEANER
I. Double-core type
Dismantle the air cleaner housing and check its
filter element, make sure it clean and intact,
otherwise clean or replace it.
II. Dust-collecting type
1. Dismantle the dust-collecting hood and check
the filter element of the air cleaner; make
sure it is clean and intact, otherwise clean or
replace.
2. Check whether there is any dust or dirt inside
the dust-collecting hood, if any, clears away.
III. Single-core type
Loading ...
Loading ...
Loading ...