4
INTRODUCTION
Thank you for choosing a De’Longhi product. Please take few
moments to read the instructions to avoid risks or damage to
the appliance.
Symbols used in these instructions
Important warnings are identied by the symbols below.
It is important to respect the warnings.
Failure to respect the warnings could lead to electric shock,
serious injury, burns, re or damage to the appliance.
Danger!
Failure to observe the warning may result in life threatening
injury by electric shock.
Important!
Failure to observe the warning could result in injury or
damage to the appliance.
Danger of burns!!
Failure to observe the warning could result in burns or scalds.
Please note:
This symbol indicates recommendations and important
information for the user.
IMPORTANT
SAFEGUARDS
When using any electrical appliance, some basic safety
precautions should always be observed to reduce the risk
of re, electric shock, and/or injury to persons. Read all
instructions carefully before using the appliance. Specically:
Danger!
- Do not operate the appliance with a damaged
cord or plug, after faulty operation, or when
it has been dropped or damaged in any way.
Contact the nearest authorized service facility
for examination, electrical or mechanical
adjustment, or repair.
- This heater is not intended for use in
bathrooms, laundry areas, or similar indoor
locations. Never position the appliance where
it may fall into a bathtub or come in contact
with water.
- Never use this heating appliance in the
immediate vicinity of a bathtub, shower, or
swimming pool.
- Do not insert or allow foreign objects to get
into the air intake or air outlet grille, as this
may cause electric shock or re, or damage
the appliance.
- CAUTION: To prevent electric shock,
make sure the wide prong of the plug is
inserted in the wide slot of the outlet.
Important!
- The appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety. Children should
be supervised to ensure that they do not play
with the appliance.
- Always disconnect the plug from the power
outlet when the appliance is not in use.
- Do not use the appliance outdoors.
- Do not run the power cord under carpeting.
Do not cover cord with throw rugs, runners,
or the like. Keep the cord away from any
passageways where it could be tripped over.
- To prevent a possible re, do not block air
intake or air outlet grille in any way. Do not
use the appliance on soft surfaces, such
as beds, where the openings may become
blocked.
- Use this appliance only as described in this
manual. Any other use not indicated by the
manufacturer may cause re, electric shock,
or injury to persons.
- To prevent current overload and blown fuses,
make sure that no other appliance is plugged
into the same outlet or into another outlet
wired into the same circuit.
- If the supply cord is damaged, to reduce the
risk of malfunction it must be replaced by the
manufacturer, its service agent, or a licensed
and qualied professional.
5
- Do not use this appliance with an extension
cord or outlet strip. Connect the appliance
directly to a suitable outlet.
- Make sure that the plug is fully inserted into
the outlet. Wall outlets may deteriorate with
time, so check the plug periodically for signs
of overheating or deformation. If the outlet
has deteriorated, stop using it and have it
repaired.
- Do not place the heater near a bed because
objects such as pillows or blankets can fall o
the bed and be ignited by the heater.
- Use the appliance always and only in the
vertical position.
- Do not use this appliance in a room smaller
than 43 square feet (4 m²).
Danger of burns!!
- This appliance gets very hot when in use. To
prevent burns, do not touch hot surfaces with
bare skin. Use the handle when moving the
appliance. Keep all ammable materials, such
as furniture, pillows, bedding, paper, clothing,
and curtains at least 3 feet (90 cm) from the
front and top of the appliance also avoid
contact with the sides and back.
- Do not wrap the cord around the appliance
immediately after use.
- Do not cover the appliance while it is
functioning in order to avoid overheating and
the risk of re.
- The internal parts of the appliance can
become very hot or produce sparks during
operation. Do not use the appliance in areas
where gasoline, paints, or other ammable
liquids are used or stored.
- It is normal for heater’s plug and cord to feel
warm to the touch. However, an excessively
hot or deformed plug or cord is not normal
and may be the result of a defective electrical
outlet. Defective outlets must be replaced
before using the heater. Plugging the heater
into a worn outlet may result in overheating
of the power cord or may cause the risk of re.
- Do not use the appliance to dry laundry, and
do not obstruct the air intake and outlet
grilles (danger of overheating).
- Do not operate the appliance in contact with
walls, furniture, curtains, etc.
Please note:
- To completely turn off the appliance, p u s h
the ON/OFF button (A), and then unplug the
heater.
- Check that neither the appliance nor the
power cord have been damaged during
shipping.
- Make sure that no styrofoam or other packing
materials remain in the appliance.
- The rst time the appliance is used, run
it at the maximum power for at least two
hours. During this time, ventilate the room
thoroughly to eliminate the “new” smell
released by the appliance. It is completely
normal for the appliance to emit “creaking”
sounds the rst time it is run.
- Do not open the appliance. No user-
serviceable parts inside.
- Before storing the appliance, check it is
completely o and the cable is unplugged.
At this point wrap the cord around the base.
Do not store in a dusty room. The room
temperature should be between 32-86°F (0-
30°C). Do not load anything above it.
- Heaters draw more current than small
appliances, overheating of the outlet may
occur even if it has not occured with the use
of other appliances.
SAVE THESE
INSTRUCTIONS
THIS PRODUCT IS FOR HOUSEHOLD USE
ONLY
6
DESCRIPTION
(see g. 1)
A ON/OFF button
B +/- adjustment buttons
C MODE button (selects the operating mode)
D “ECO plus” button
E Timer button
F Swivel button
G Remote control receiver
H Indicator light
I Air intake grille
J Filter
USE
Installation
- The appliance can be used on any horizontal surface.
Do not overload the electrical circuit.
Avoid using the same outlet for other appliances.
Electrical connection
- Before plugging the appliance into the outlet, check that
the outlet power corresponds to the value indicated on
the rating plate and that the outlet power is adequate
for the load.
- THIS APPLIANCE COMPLIES WITH DIRECTIVE 2004/108/
EEC ON RADIO INTERFERENCE SUPPRESSION.
Mounting the base
- Fit the two parts of the base together, matching the
guide pins on the front with the recesses on the back
and snapping the two clips into place (g. A and g. B).
- Turn the appliance upside down and position the
assembled base on the appliance in order to couple
the two openings with the two tabs on the appliance,
tilting it as shown in gure C, consequently turn the
base down till the two frontal teeth snaps into position
(gure D).
- Assembly time: approx. 5 minutes.
- Optional
- Fasten the tower to the base using the screw
provided to achieve extra stability.
- Tools needed and estimated time:
1 Phillips head screwdriver type PH 2 x 100
1 screws (included)
Assembly time: approx. 2 minutes.
Operation and use
1. Plug into the outlet.
2. The appliance emits a beep. The indicator light (H)
comes on and remains lit while the appliance is
powered.
3. Press the ON/OFF button (A) to turn the appliance on.
The appliance comes on with the setting used during
the previous period of operation.
Optional screw
Fig. A
Fig. C
Fig. D
Fig. B
7
4. Press the MODE button (C) to select one of the following
operating modes:
Fan
Freeze prevention
Heating 1
Heating 2
Heating 3
4.1 Fan
In this mode, only the fan operates and the appliance does
not heat the room.
4.2 Freeze prevention
In this mode, the appliance keeps the room at a temperature
of 45°F (7°C) to avoid freezing.
4.3 Heating 1, 2 and Heating 3
In this mode, the desired temperature can be selected by
pressing the adjustment buttons + and – ( B ):
- Heating 1
The appliance operates at low power, reducing noise
levels and energy consumption to a minimum.
- Heating 2
The appliance operates at medium power.
- Heating 3
The appliance operates at high power to heat the room
rapidly.
Please note: Room temperature can be displayed in
either °F or °C. To change the unit of measurement for the
temperature, press the + button for approx. 10 seconds, then
release.
5. “ECO plus” function
The “ECO plus” function is available in Heating 1, 2 and 3 modes
only. To activate the function, press the “ECO plus” button (D).
When this function is active the appliance automatically sets
the most appropriate power level to guarantee optimum
comfort while reducing energy consumption.
While the “ECO plus” function is active, the appliance may
switch automatically to a lower heating power than the one
displayed. This may happen a number of times in an hour.
6. Swivel button
To distribute the air ow over a wider surface, press the swivel
button (F) . The appliance swivels to the right and left.
To stop the appliance in the desired position, simply press the
swivel button (F) again.
7. Turn the appliance o
To turn the appliance o, press the ON/OFF button (A).
The display may show a countdown for about 6 seconds.
Digital 24 h timer (selection from 0.5 hrs to 24
hrs)
This function can be activated from any operating mode.
Auto-start: with the appliance in ON/OFF, press the timer
button (E) . The symbol is displayed together with
the time remaining before the appliance comes on.
To adjust the timer, use the adjustment buttons + and -
(B), then wait a few seconds for the setting to be stored.
The stand-by light (H) is displayed together with the
symbol, indicating that the timer has been set. When the
programmed time is reached, the appliance comes on with
the settings used during the previous period of operation.
Auto-o: Auto-o: with the appliance on, press the timer
button (E). The symbol is displayed together with
the time remaining before the appliance goes o. To set the
timer, use the adjustment buttons + and - (B), then wait a
few seconds for the setting to be stored.
The current settings are displayed again, together with the
symbol indicating that the timer has been set. When
the programmed time is reached, the appliance goes o
automatically. To go back to operation without the timer,
press the timer button (E) twice.
The timer symbol disappears from the display.
Using the remote control
The functions on the remote control are the same as those on
the appliance control panel. For a description of the functions,
see the “Operation and use” section on the previous page.
Installing or replacing the batteries
The remote control is powered
by one CR2032 3V lithium
battery, already included
inside. To operate the remote
control, pull and remove
the plastic strip under the
battery cover. To replace the
batteries, remove the battery
cover by sliding it as shown
in the gure. When replacing
the batteries, make sure you
respect the polarity (see gure 2).
Replace the cover as shown in the gure. Old batteries are
harmful to the environment and must be removed and
disposed of in compliance with current legislation. Non-
rechargeable batteries are not to be recharged.
WARNING: DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES
MAY EXPLODE OR LEAK.
Fig. 2
8
MAINTENANCE
- Always unplug from the outlet before cleaning.
- During the season when the appliance is in use, clean
the air intake and outlet grilles regularly using a vacuum
cleaner.
- To clean the lter, remove the rear grille by pulling it
outwards (g. 1). Remove the dust lter that retains
impurities in the air drawn in from the room, blow on it
lightly then put it back in the appliance.
- Never use abrasive powders or solvents to clean the
appliance.
Safety functions
- Safety device: the appliance is tted with a safety
device that switches it o in the event of accidental
overheating (e.g. obstruction of air intake and outlet
grilles, motor turning slowly or not at all). To reset,
unplug the appliance from the outlet for a few minutes,
remove the cause of overheating, then plug in again.
- Tip-over safety device: a tip-over safety device
turns the appliance o if it falls over or is positioned
inappropriately in such a way as to jeopardize safety.
The appliance emits a beep and a dot ashes on the
display. The appliance resumes operation a few seconds
after being placed in an upright position again.
TECHNICAL CHARACTERISTICS
Power supply See rating plate
Absorbed power “
PROBLEM CAUSE SOLUTION
PF display
Temperature sensor is not working
properly
The product needs to be serviced, contact
our toll free number for assistance
Product doesn’t turn on Check that the plug is connected to the
outlet
Auto-start is on
Room temperature reaches the set
temperature
Plug in
Wait till time elapsed or press the but-
ton (E) twice to cancel the auto-start
and push the button (A)
Use the “+” button to increase the set
temperature
A green dot is ashing and unit is o The tip-over switch has been activated Make sure the appliance is standing
upright on a at surface, if the problem
persists contact our toll free number to
assist you
TROUBLESHOOTING
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in
a particular installation. lf this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment o and on,
the user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
Modications not approved by the party responsible
for compliance could void user’s authority to operate
the equipment.
CAN ICES-3 (B) / NMB-3 (B)
9
LIMITED WARRANTY
This warranty applies to all products with De’Longhi or Kenwood brand names.
What does the warranty cover?
We warrant each appliance to be free from defects in material and workmanship. Our obligation under this warranty is limited
to repair at our factory or authorized service center of any defective parts or part thereof, other than parts damaged in transit.
In the event of a products replacement or return, the unit must be returned transportation prepaid. The repaired or replacement
model will be returned at the company expense.
This warranty shall apply only if the appliance is used in accordance with the factory directions, which accompany it, and on an
Alternating current ( AC ) circuit.
How long does the coverage last?
This warranty runs for one year (1) from the purchase date found on your receipt and applies only to the original purchaser for
use.
What is not covered by the warranty?
The warranty does not cover defects or damage of the appliance, which result from repairs or alterations to the appliance
outside our factory or authorized service centers, nor shall it apply to any appliance, which has been subject to abuse, misuse,
negligence or accidents. Also, consequential and incidental damage resulting from the use of this product or arising out of any
breach of contract or breach of this warranty are not recoverable under this warranty. Some states do not allow the exclusion or
limitation of incidental or consequential damage, so the above limitation may not apply to you.
How do you get service?
If repairs become necessary, see contact information below:
U.S. Residents: Please contact our toll free hotline at 1-800-322-3848 or log onto our website at www.delonghi.com
Residents of Canada: Please contact our toll free hotline at 1-888-335-6644 or log onto our website at www.delonghi.com
Residents of Mexico: Please contact our toll free number 01-800-711-8805 for assistance or log onto our website at www.
delonghi.com
The above warranty is in lieu of all other express warranties and representations. All implied warranties are limited to the
applicable warranty period set forth above. This limitation does not apply if you enter into an extended warranty with
De’Longhi. Some states/countries do not allow limitations on how long an implied warranty lasts, so the above exclusions may
not apply to you. De’Longhi does not authorize any other person or company to assume for it any liability in connection with
the sale or use of its appliance.
How does country law apply?
This warranty gives you specic legal rights, and you may also have other rights, which vary from state to state/country to
country.
