Loading ...
Loading ...
Loading ...
ControlsandFeatures
4
F
Starter
Button
Overload
Switch
\
Motor/Blade
Control Lever
Cord Retainer
Cutting Height
Adjustment Lever
Motor/Blade Control Lever
Figure 4-1
WARNING: Read, understand, and follow all OverloadProtection Switch
instructions and warnings on the machine and in
The mower is equipped with an overload protection switch,
this manual before operating, located on the motor/blade control. This overload protection
switch may pop out when too much strain is placed on the
motor. Refer to the Maintenance & Adjustments Section to reset
this switch.
_ ARNING: The motor/blade control lever is a
safety device. Never attempt to bypass its
operations.
The motor/blade control lever is located on the upper handle
of the mower. The motor/blade control lever engages and
disengages the motor and blade.
CordRetainer
The cord retainer is located on the upper handle of the mower.
The cord retainer secures your extension cord and safely limits its
movement.
CuttingHeight Adjustment Lever
The cutting height adjustment lever is located above the right
rear wheel. To adjust the cutting height, refer to the Assembly
Section.
Starter Button
The starter button is located on the upper handle of the mower.
Engaging the motor/blade control lever with the starter button
pressed will start the mower.
Loading ...
Loading ...
Loading ...