Remington 18A-212A783 Operator's Manual

Loading ...

CordConnection

NOTE: Do not plug your extension cord into the power source

receptacle (outlet) prior to routing it through the cord retainer

and connecting the extension cord to the mower's cord outlet

receptacle.

To properly route your extension cord through the cord retainer:

1. Approximately 14 to 16-inches from its end, crease your

extension cord to form a tight loop.

2. Push the loop through the bottom hole in the cord

retainer. See Fig. 3-7.

3. Position the loop over the clip found on the cord retainer

and pull down until the cord fits snugly into the clip. See

Fig. 3-7.

NOTE: Use a Ul_-approved extension cord. A 100-foot,

14-gauge cord is recommended. A 50-foot, 16-gauge

cord is acceptable. Refer to the small chart found in Safe

Operation Practices.

NOTE:The cord retainer secures your extension cord and

safely limits its movement.

Figure 3-7

GrassCollection

1. To assemble the grass bag, secure the plastic channels of

grass bag over frame rods. See Fig. 3-8.

Frame Rod"

Plastic Channels

Figure 3=8

2. Follow steps below to attach grass catcher:

a. Lift rear discharge door.

b. Remove rear mulching baffle. See Fig. 3-9.

NOTE: Swing the mulching baffle to the right side of the

mower and then slide out.

Figure 3-9

'°1

SECTION 3 -- ASSEMBLY& SET-UP

Loading ...

Remington 18A-212A783 (19") 12-Amp 3-in-1 Electric Push Lawn Mower